Installing
drywall on a wall without a profile and
aligning
the surface of the walls with plaster takes a lot of time and
requires special skills from people doing this kind of work. Faster
and easier it is possible to solve the problem, using gypsum
plasterboard sheets for decoration, which are sometimes also referred
to as plasterboards.
Inexpensive and affordable material has established itself well and
is widely used when working in premises for various purposes. For
reliable finstalling
of drywall, it is customary to use a special profile from which the
frame is erected, which allows you to align and securely fix the skin
with self-tapping screws or glue.
However, traditional technology eats up the area of the finished premises. This is not always acceptable. With a lack of internal space, every foot is counted. It is possible to solve the problem if you perform drywall installation https://ikhomepros.com/drywall-installation/ without a profile.
Fixing drywall with self-tapping screws. In some cases, this method of fixing is justified. Among its undoubted advantages: High pace of work. There is no need to wait for the glue or foam to dry. No need to degrease the surface to be mounted. The ability, if the need arises, to dismantle one or more panels without problems.
However, traditional technology eats up the area of the finished premises. This is not always acceptable. With a lack of internal space, every foot is counted. It is possible to solve the problem if you perform drywall installation https://ikhomepros.com/drywall-installation/ without a profile.
Fixing drywall with self-tapping screws. In some cases, this method of fixing is justified. Among its undoubted advantages: High pace of work. There is no need to wait for the glue or foam to dry. No need to degrease the surface to be mounted. The ability, if the need arises, to dismantle one or more panels without problems.
All these advantages are often discounted by serious technology flaws: Self-tapping screws can only be used when the wall material allows it. Do not try to use them, wrapping them in highly hard brick or porous blocks of aerated concrete. The surface on which the cladding elements are attached must be well aligned. Wrap hundreds of screws with an ordinary screwdriver will not work. Thus, it is easiest to fix drywall to wooden walls. For other cases, it may be worth choosing a different method.
You
can fix drywall to the wall using various adhesives. So-called
"liquid nails" have proved to be quite good. Regardless of
the specific formulation, such compositions are characterized by high
strength after solidification. Among the advantages of this
installation technique: Strength of fixing of the finishing material.
Lack of residual deformations after drying of glue. The ability to
finish sheets of drywall surfaces from
virtually any material. Do not forget about the minuses, which should
include: Mandatory preparation of the walls. It will have to be
performed quite qualitatively. The difficulty of fitting the joints
between the panels from the gypsum board. The need for the
preparation of spacer structures that will press the panels to the
surfaces until the glue is finally polymerized.
Having chosen a similar installation technique, we fasten drywall, acting in the following sequence: We clean the wall from weak and non-adhesive coatings - peeling paint, old plaster, etc., using a metal brush or a nozzle for a drill. Level the surface. We remove small irregularities using a spatula and sanding paper. Significant protrusions, the height of which exceeds a couple of millimeters, knock down a puncher, chisel or chisel. Large cavities are sealed with putty or plaster. We are trying on, applying several panels to the surface. We make sure that there are no significant differences between the ends of the sheets. Ground the wall. Penetrating acrylic primer is best suited for its intended purpose.
Do not skimp and put it in several layers, eliminating the need to degrease the surface. To apply the composition, use a spray gun, a long-nap roller or a brush of a suitable size. Wait until the soil is completely dry.
Having chosen a similar installation technique, we fasten drywall, acting in the following sequence: We clean the wall from weak and non-adhesive coatings - peeling paint, old plaster, etc., using a metal brush or a nozzle for a drill. Level the surface. We remove small irregularities using a spatula and sanding paper. Significant protrusions, the height of which exceeds a couple of millimeters, knock down a puncher, chisel or chisel. Large cavities are sealed with putty or plaster. We are trying on, applying several panels to the surface. We make sure that there are no significant differences between the ends of the sheets. Ground the wall. Penetrating acrylic primer is best suited for its intended purpose.
Do not skimp and put it in several layers, eliminating the need to degrease the surface. To apply the composition, use a spray gun, a long-nap roller or a brush of a suitable size. Wait until the soil is completely dry.
